Openocd drivers windows

For example hammer. When you run OpenOCD with the hammer. If you have compiled OpenOCD yourself, the easiest way to avoid these issues is to copy openocd. To run OpenOCD , navigate to openocd You can also create a new folder anywhere on your system, and copy openocd. When you run OpenOCD for the first time with new hardware, you may encounter this error:. If you see this error, you will need to install a Libusb Device Filter.

Starting OpenOCD like this does the following, in order:. From eLinux. Jump to: navigation , search. The xPack OpenOCD can be installed automatically, via xpm the recommended method , or manually, by downloading and unpacking one of the portable archives.

The only requirement is a recent xpm, which is a portable Node. To install it, follow the instructions from the xpm install page. This command will always install the latest available version, in the global xPacks store, which is a platform dependent folder check the output of the xpm command for the actual folder used on your platform. For all platforms, the xPack OpenOCD binaries are released as portable archives that can be installed in any location. The archives can be downloaded from the GitHub releases page.

Download the latest version named like:. This guide includes basic information about using the Windows command line. The command prompt displays your current directory location. You will need to navigate to the OpenOCD directory to run it. File paths can be absolute…. Absolute paths are from your root directory, and begin with a slash or the current drive letter. Relative paths are from the current directory and do not begin with a slash.

File paths are not case sensitive. Navigate to the directory containing your openocd executable. You will need to be logged onto an account with administrator privileges. If you do not have access to such an account, contact your system administrator. OpenOCD searches in its own directory first for config files. Each time you use OpenOCD you will need to configure it by passing it paths to configuration files.

In the OpenOCD 0. When you start OpenOCD , you tell it to use the config files for your hardware with the -f switch, like this:. You would type:. Be aware that config files may contain paths to other config files. For example hammer.